CALCULATING SYSTEM FOR SECOND-ORDER EFFECT IN THE COLUMNS OF REINFORCED CONCRETE FRAMES

This paper makes an analysis and comparison of the calculatingsystem for second-order effect in columns of reinforced concrete frames proposedby scholars at home and abroad,and the systems adopted by codes of manycountries.The focus is on explaining the conceptual error and deficiency in somemethods.After expounding the basic law of the second-order effect in framecolumns with different restraints,this paper suggests an improvement of thecalculating system for second-order effect in frame columns for China's DesignCode of Concrete Structures.     

Using of AFLP Marker to Predict the Hybrid Yield and Yield Heterosis in Rice

利用AFLP分子标记对46个水稻品种进行遗传多样性分析,继而研究分子标记遗传距离与按照NC设计获得的195个杂交组合的产量及特殊配合力的相关性,探讨预测杂种优势的可能性。结果表明:(1)通过UPGMA聚类分析(图3),可将供试材料分为16个类群,并把来源不明的品种(系)划分到相应类群中,从而对这些材料进行初步鉴定。可见,AFLP分子标记是检测类内品种间遗传差异的有效方法,为水稻品种(系)亲本选配提供理论依据。(2)分子标记遗传距离与杂种产量优势、F1产量、特殊配合力之间都呈显著正相关,相关系数介于0.3235-0.7713之间。但相关程度还不足以预测杂种优势。增效座位和减效座位以及使用与杂种优势有关的QTL连锁标记位点可能提高杂种优势的预测能力,但最终解决,将依赖于杂种优势遗传机理的研究。     

Experimental Study on the Extended Length of Negative Reinforcement Cut-in Phases in Continuous Beams

In this paper through the static loading tests of 6 inflexion zones and 2 cantilever zones in full-size constrained R/C beams, the stress performance in rebars cut-in-phases and subjected to negative moment is studied. The stress properties of extended length of rebars with different shear-span ratiosare analysed on basis of the full measurement of strain distributions combined with the investigation on state and regularity of the diagonal cracks development and series of new knowledge are obtained. It is found that current Concrete Design Code provisions on the extended length are inadequate for the high shear-span ratio and superfluous for the low shear-span ratio. The theoretical and experimental foundations are provided for determining proper value of extended length for rebars cut-in-phases.     

电车接触网腕臂的计算

电气化铁道的“三大元件”分为接触网、电力机车和牵引变电所。本论文论述时速200Km/h高速电气化铁路的接触网电车接触网腕臂的计算,接触网的计算精确程度就关系到接触线悬挂的可靠程度,故接触网计算是设计中基础的工作内容,其计算主要分为腕臂的计算和接触网的负载计算。文章详细分析了腕臂长度的计算方法,重点介绍了路基曲线区段腕臂长度、转换柱和中心柱腕臂长度的计算。     

A molecular marker linked to the Prv1 gene that confers resistance to Papaya ringspot virus-type W in melon

Papaya ringspot virus‐type W (PRSV‐W) is the most prevalent and important viral pathogen of cucurbits in Brazil. It can be effectively controlled by the incorporation of genetic resistance into susceptible melon cultivars. The present study identified amplified fragment length polymorphic (AFLP) markers linked to the PRSV‐W resistance Prv¹ allele. The susceptible yellow‐fleshed melon‐breeding line AF426^prv1 and its nearly isogenic‐resistant line AF426^Prv1, which carries the Prv¹ allele resident in the Indian cantaloupe U.S. Plant Introduction (PI) 180280, were screened for AFLP marker polymorphisms. Of 30 251 AFLP loci, only three were polymorphic between the nearly isogenic lines. Segregation analyses for these three polymorphic markers and the Prv¹ allele using a BC₁ population of 197 plants indicated close linkage (0.5% recombination frequency) between marker EK190 (HindIII‐CGA and MseI‐GTG; 190 bp) and Prv¹. Thus, EK190 might be a useful marker in breeding programmes aiming to develop melon cultivars resistant to PRSV‐W. The other two markers are closely linked to each other, but distantly linked to Prv¹.     

Precision of genetic relationship estimates based on molecular markers

Genetic progress through selection is directly related to the amount of variability present in the population and the quality of genes contributed by the parents. Genetic relationships between lines were studied using DNA marker-based estimates of genetic similarity. A statistical methodology using the width of a confidence interval was developed to determine the number of probes to be surveyed and the precision in the estimation of genetic distance between pairs of cultivars. Precision was affected by type of genetic distance used, the number of cultivars, and amount of genetic diversity present in the studied group. The width of a (1-α)% confidence interval decreased as the number of RFLP fragments increased. Oat and wheat diversity studies were used to illustrate the methodology. This revised version was published online in July 2006 with corrections to the Cover Date.     

Integration of AFLP markers into a linkage map of sugar beet (Beta vulgaris L.)

The AFLP (amplified fragment length polymorphism) technique has been applied in establishing an extended linkage map of sugar beet. A total of 120 AFLPs were integrated into an existing linkage map based on RFLP markers. Four primer combinations yielded between 19 and 40 polymorphic bands in an F₂ population consisting of 94 plants. The AFLP loci were evenly distributed over the nine linkage groups, with the exception of linkage group V where the number of AFLPs was significantly low. The AFLPs were found to be reproducible even against the background of different combinations of Taq DNA polymerases and buffers. However, the quantity of higher molecular weight fragments (>400 bp) was reduced when using plant DNA of poor quality as a template. The results of these experiments are discussed, together with possible applications of AFLPs in sugar beet breeding.     

Indentification of true genetic dwarfing sources in foxtail millet (Setaria italica Beauv.)

Summary True genetic dwarfs hither-to not reported have been located in foxtail millet. The dwarfs as a group distinguished themselves from the talls in having altered constellation of characters. The morphological differences were highly significant for plant height, internodal length, and tillering potential. The talls had elongated internodes compared to dwarfs while there was no difference for node number on the main stem suggesting that short internodal length was primarily responsible for dwarfism. The dwarfs also showed slightly higher leaf number per plant, leaf area and harvest index compared to talls. The dwarfs were insensitive to exogenous GA₃ application indicating that GA₃ synthesis is not impaired. This suggests that dwarfing gene sources presently identified are true genetic dwarfs and their behaviour is similar to dwarfs derived from Norin 10 in wheat and Dee-geo-woo-gen in rice. The superior morphological frame makes these dwarfs ideal as far as plant type is concerned and offers immense potentialities in breeding high yielding foxtail millets.     

Genetic study of bolting and stem length in sugar beet (Beta vulgaris L.) using a factorial cross design

Summary The objective was to study the genetic basis of bolting and stem length in sugar beet full-sibs, developed by a factorial mating design (N.C. design II). The extent to which the inheritance of these characters can be attributed to the additive and non-dominance variation was investigated. The genetic analysis consisted of three sets (4×10, 4×8, and 3×8) of progenies. Estimates of additive genetic variance (² _A) and variance due to dominance deviations with some fractions of epistatic variance (² _D) were obtained for both characters. Bolting had a relatively large proportion of total genetic variance accounted for by ² _A. In most cases, non-additive effects were also important in determining the type of gene action in bolting. Stem length showed similar genetic variation to bolting susceptibility. Bolting resistance seemed to be dominant to the bolting susceptibility in most cases. Narrow sense heritability estimated for bolting was generally very large (0.93 to 0.96), which suggests that early generation selection for bolting resistance in a sugar beet population would be successful.     

Identification and breeding behaviour of a major deletion of chromosome 5D ofTriticum aestivum

Summary A study was undertaken to evaluate the breeding behaviour and to identify a spontaneously produced putative chromosomal deletion in the winter wheat (Triticum aestivum L. em. Thell.) cv Norstar. Male and female transmission studies of plants heterozygous for the deletion chromosome indicated 9.5% and 48.8% transmission through the pollen and the egg, respectively. Meiotic analyses of progeny from deletion heterozygotes indicated that the deletion chromosome was eliminated from half of the plants, which agreed with the male and female transmission frequencies. Testcrosses of the deletion chromosome with telocentrics and nullisomic-tetrasomic combinations suggested that the deletion involved the long arm of chromosome 5D. This was confirmed by restriction fragment length polymorphism (RFLP) analysis. Also, monosomic plants obtained in progeny of deletion heterozygotes were shown to be monosomic for 5D. Studies of plants homozygous for the deletion showed relatively normal pairing between the deletion chromosomes, and with the short arm (5DS), but not the long arm (5DL). Deletion homozygotes were self-sterile, and morphologically similar to plants nullisomic for 5D, but plants that also contained 5DL, or a homoeologous chromosome were self-fertile and had normal morphology. Studies of chromosome morphology indicated that the deletion chromosome was metacentric, and the length of the long arm was reduced by approximately 60%. RFLP studies showed that, in terms of genetic distance, 90% of the arm was missing.